引用本文:董晓坤,赵军. 气分换热器结焦原因分析[J]. 石油与天然气化工, 2005, 34(5): 380-383.
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 1510次   下载 7 本文二维码信息
码上扫一扫!
分享到: 微信 更多
气分换热器结焦原因分析
董晓坤,赵军
作者单位
摘要:
根据生产装置所采用化工原材料和流程,并结合气分换热器结焦物组分分析,认为气分车间换热器结焦的原因为重催液化气中携带脱硫剂N-甲基二乙醇胺焦化产物类物质,在装置运转过程中降解、聚合形成的结焦物造成的。在实验室合成了与气分车间基本一致的结焦物,更进一步证实了上述结论,并据此提出了抑制结焦的解决办法。
关键词:  结焦 MDEA 氧化 降解
DOI:
分类号:TQ331.4 TK172
基金项目:
Analysis on the Cause of Coking in the Heat Exchanger of A Gas Fractionator
Dong Xiaokun  Zhao Jun
Abstract:
According to the raw materials and flow sheet employed by the unit, and the coke composition a-nalysis result in the heat exchangers of a gas fractionator, it was concluded that the formation coke was resulted from degradation and polymerization of the de
Key words:  coking, MDEA, oxidation, degradation