摘要: |
应用Chemsepl软件对甲醇精馏中的加压精馏塔进行模拟,模拟值与实际值基本吻合。讨论了不同进料位置对分布曲线及精馏过程的影响。当进料位置在塔上部3(理论板)左右时,进料位置上下的浓度分布曲线斜率相同,没有出现挟点,回流比合适,塔内各组分的浓度分布均匀,产品合格,结果符合工业实际过程。 |
关键词: 甲醇 加压精馏 分布曲线 模拟计算 |
DOI: |
分类号:TQ223.121 |
基金项目: |
|
Analysis on Influence of Feed Entrance Point to Distribution Curve in Methanol Press Distillation |
Xu Xinle
|
Chemical Engineering College of Qinghai University, Xining 810016, Qinghai
|
Abstract: |
The press distillation was simulated by Chemsepl software. The simulation values were basicallyconsistent with the actual values. The effect of feed entrance point to distribution curve and distillation processes were discussed. When the feed entrance point is the top of No. 3 layer, the slope of distribution curve is same in close to feed entrance point. There has not pinch point. Reflux ratio is suitable,and the concentration distribution is uniform. The product is up to standard and the results accord with real in-dustrial process. |
Key words: methanol press distillation distribution curve simulation calculation |