引用本文:黄刚华,陈世明,江晶晶,杨爽,彭银华,蒋军锋. 尾气处理装置烟气加热器腐蚀失效原因分析[J]. 石油与天然气化工, 2024, 53(3): 8-13.
【打印本页】   【HTML】   【下载PDF全文】   【查看/发表评论】  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被：浏览 684次   下载 195次 本文二维码信息
码上扫一扫！
分享到： 微信 更多
字体:加大+|默认|缩小-
尾气处理装置烟气加热器腐蚀失效原因分析
黄刚华1,2,3,陈世明4,江晶晶1,2,3,杨爽5,彭银华6,蒋军锋5
1.中国石油西南油气田公司天然气研究院;2.国家能源高含硫气藏开采研发中心;3.中国石油天然气集团公司高含硫气藏开采先导试验基地 ;4.中国石油西南油气田公司;5.中国石油西南油气田公司天然气净化总厂;6.中国石油西南油气田公司川中油气矿
摘要:
目的分析某天然气净化厂康索夫(Cansolv)尾气处理装置烟气加热器出现严重腐蚀失效的原因。 方法分析了烟气加热器管束的腐蚀环境,开展了材料理化性能、腐蚀产物成分及微观形貌等失效原因分析。 结果失效管束的理化性能符合要求,管束泄漏处呈坑状和蜂窝状,部分沟槽尖端有裂纹,且深入基体,呈现应力腐蚀的特征。 结论烟气加热器在高温、高酸液含量的环境下发生了电化学腐蚀和应力腐蚀,导致管束出现腐蚀泄漏。 
关键词:  Cansolv  尾气处理  腐蚀  烟气加热器  不锈钢  S31254 
DOI：10.3969/j.issn.1007-3426.2024.03.002
分类号:
基金项目:中国石油集团公司重大科技专项课题“CCUS注采工艺、产出气循环利用及高效防腐关键技术研究”(2021ZZ01-04)
Cause analysis of corrosion failure in flue gas heater of tail gas treatment unit
HUANG Ganghua1,2,3, CHEN Shiming4, JIANG Jingjing1,2,3, YANG Shuang5, PENG Yinhua6, JIANG Junfeng5
1. Research Institute of Natural Gas Technology, PetroChina Southwest Oil & Gasfield Company, Chengdu, Sichuan, China;2. National Energy R&D Center of High Sulfur Gas Exploitation, Chengdu, Sichuan, China;3. High Sulfur Gas Exploitation Pilot Test Center, CNPC, Chengdu, Sichuan, China;4. PetroChina Southwest Oil & Gasfield Company, Chengdu, Sichuan, China;5. Natural Gas Purification Plant General, PetroChina Southwest Oil & Gasfield Company, Chongqing, China;6. Central Sichuan Oil and Gas District, PetroChina Southwest Oil & Gasfield Company, Nanchong, Sichuan, China
Abstract:
ObjectiveThe aim is to analyze the causes of serious corrosion failure of flue gas heater in Cansolv tail gas treatment unit of a natural gas purification plant. Methods The corrosion environment of the flue gas heater tube bundle was analyzed, and the failure reasons, such as the physical and chemical properties of the material, the composition of the corrosion products and the micro-morphology were analyzed. ResultsThe physical and chemical properties of the failed tube bundle met the requirements. The leakage area of the tube bundle was pit-shaped and honeycomb-shaped, and some groove tips had cracks that penetrate deep into the substrate, exhibiting stress corrosion characteristics. ConclusionsThe electrochemical corrosion and stress corrosion occurred in the flue gas heater under high temperature and high acid content, resulting in corrosion leakage of the tube bundle.
Key words:  Cansolv  tail gas treatment  corrosion  flue gas heater  stainless steel  S31254