引用本文:秦静. 醚化反应过程中全组分含量测定分析方法中样品溶剂的改进[J]. 石油与天然气化工, 2013, 42(4): 409-411.
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 1854次   下载 962 本文二维码信息
码上扫一扫!
分享到: 微信 更多
醚化反应过程中全组分含量测定分析方法中样品溶剂的改进
秦静
(中国石油乌鲁木齐石化公司)
摘要:
MTBE装置醚化反应过程中全组分含量测定分析中因使用丁酮做溶剂,导致分析人员出现同样症状的过敏现象,就此研究了用无水乙醇替代 丁酮这一过敏源,既消除了岗位人员的过敏现象,且对分析结果没有影响。
关键词:  丁酮  无水乙醇  样品溶剂  改进 
DOI:10.3969/j.issn.1007-3426.2013.04.018
分类号:
基金项目:
Improvement of sample solvent in determination of total components contents during etherification reaction
Qin Jing
(PetroChina Urumqi Petrochemical Company,Urumqi 830019,Xingjiang,China)
Abstract:
The analysts have the same allergy symptoms after using the solvent of butanone to determine total components contents during the etherification reaction process in MTBE installation. Therefore, we use the absolute alcohol instead of the butanone, which has eliminated the allergy symptoms of analysts, and has no effect on analysis results.
Key words:  butanone  absolute alcohol  sample solvent  improvement