引用本文:李国明,贠玉平,王亚雄,安思彤,唐组友. 永宁采油厂双河西区注水井腐蚀结垢控制[J]. 石油与天然气化工, 2014, 43(2): 179-184.
【打印本页】   【HTML】   【下载PDF全文】   【查看/发表评论】  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被：浏览 1866次   下载 908次 本文二维码信息
码上扫一扫！
分享到： 微信 更多
字体:加大+|默认|缩小-
永宁采油厂双河西区注水井腐蚀结垢控制
李国明1, 贠玉平2, 王亚雄2, 安思彤3, 唐组友3
1.陕西延长石油集团有限责任公司研究院;2.延长油田股份公司研究中心;3.中原油田采油工程技术研究院
摘要:
针对双河西区注水系统腐蚀结垢严重,影响正常生产的问题,对其腐蚀结垢原因进行了分析。确定了水中溶解氧、细菌以及成垢阴阳离子的存在是导致回注水腐蚀结垢严重的主要因素。通过实验筛选出pH值调节剂、除氧剂、杀菌剂以及缓蚀阻垢剂作为水质防腐防垢的药剂,处理后水质腐蚀速率降低89.7%,结垢速率降低72.5%,腐蚀结垢程度减弱,达到回注要求。 
关键词:  注水井  腐蚀  结垢  控制方法 
DOI：10.3969/j.issn.1007-3426.2014.02.015
分类号:TE988.2
基金项目:
Corrosion and scaling control of reinjection water well at Shuanghe west district in Yongning oil production plant
Li Guoming1, Yun Yuping2, Wang Yaxiong2, An Sitong3, Tang Zuyou3
1.Research Institute of Shaanxi Yanchang PetroleumGroupCo.,Ltd,Xi′an 710075,Shaanxi, China;2.Yanchang Oil Field Stock Company Research Center,Yan′an 716000,Shaanxi, China;3.Petroleum Production Technology Research Institute of Zhongyuan Oil Field, Puyang 457001,Henan, China
Abstract:
Corrosion and scaling in reinjection water system is a serious problem at Shuanghe west district in Yongning oilfield, which affects normal production. Oxygen, bacteria and scaling dietary cationanion exist in water cause the problem. Corrosion and scaling problem was resolved by adding pH regulator, deoxidant, bactericide, corrosion and scaling inhibitor to the reinjection water. The corrosion and scaling degree of the water is weakened, the corrosion rate decreases 89.7% and the scaling degree decreases 72.5%,which satisfy the reinjection standard requirement.
Key words:  reinjection water well  corrosion  scaling  control technique