引用本文:高道伟,段爱军,赵震,邓云川. FCC汽油加氢脱硫工艺技术研究进展[J]. 石油与天然气化工, 2013, 42(3): 216-221.
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 1929次   下载 1319 本文二维码信息
码上扫一扫!
分享到: 微信 更多
FCC汽油加氢脱硫工艺技术研究进展
高道伟,段爱军,赵震,邓云川
(中国石油大学(北京)重质油国家重点实验室)
摘要:
介绍了国内外典型的选择性加氢脱硫工艺及加氢脱硫-辛烷值恢复工艺的研究进展。对各工艺的流程及特点进行比较,并概述了目前工业上常用的FCC汽油加氢脱硫催化剂。最后,对FCC汽油加氢脱硫技术的发展趋势进行了展望。 
关键词:  加氢脱硫  辛烷值恢复  催化剂  研究发展趋势 
DOI:10.3969/j.issn.1007-3426.2013.03.003
分类号:TE624.4+31
基金项目:国家自然科学基金项目(21073235,7);中国石油天然气股份有限公司基金项目(08-09-05-02)。
Research development of hydrodesulfurization technology of FCC gasoline
Gao Daowei, Duan Aijun, Zhao Zhen, Deng Yunchuan
(State Key Laboratary of Heavy Oil Processing, China University of Petroleum, Beijing 102249, China)
Abstract:
The research progresses of typical selective hydrodesulfurization process and hydrodesulfurization-octane recovery process at home and abroad were reviewed. The processes and characteristics of each process were compared. The current commercial hydrodesulfurization catalysts of FCC gasoline were also summarized. Finally, the development tendency of hydrodesulfurization technologies was put forward.
Key words:  hydrodesulfurization  octane number recovery  catalyst  research development tendency