引用本文:叶鹏,刘道平,张健. 悬浮气泡表面天然气水合物形成的特性研究[J]. 石油与天然气化工, 2013, 42(5): 468-472.
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 1656次   下载 726 本文二维码信息
码上扫一扫!
分享到: 微信 更多
悬浮气泡表面天然气水合物形成的特性研究
叶鹏,刘道平,张健
(上海理工大学制冷技术研究所)
摘要:
基于悬浮气泡表面生成气体水合物的高压可视化实验装置,分析探讨了系统压力、温度、水质因素对天然气水合物的成核和生长规律的影响。研究结果表明,随着反应温度的降低和反应压力的增大,诱导时间和生长时间呈现出缩减的趋势,气泡表面水合物逐渐由粗糙变得光滑;蒸馏水形成的水合物比较规则、密实,而纯净水形成的水合物略显凌乱、松散;相同实验条件下,蒸馏水生成水合物的诱导时间和生长时间较短。
关键词:  天然气  水合物  悬浮气泡  生长特性  诱导时间 
DOI:10.3969/j.issn.1007-3426.2013.05.006
分类号:
基金项目:
Characteristics researches of natural gas hydrate growth on the suspended bubble surface
Ye Peng, Liu Daoping, Zhang Jian
(Institute of Refrigeration Technology, University of Shanghai for Science and Technology, Shanghai 200093, China)
Abstract:
Based on a set of high-pressure visual experiment device built for the investigation of the natural gas hydrates crystallization and growth on the suspended gas bubble surface, the influence factors such as pressure, temperature, water quality were analyzed and discussed. The results showed that the higher pressure or the lower temperature resulted in the less induction time and growth time, which led to surface changing from rough to smooth. The surface of hydrate film in distilled water is smoother and tidier than that in pure water. Under the same experimental conditions, the hydrate film in distilled water grew faster than that in pure water.
Key words:  natural gas  hydrate  suspended bubble  growth characteristics  induction time