引用本文:孙芳芳,MuhammadAdnan,张楠,宋彬,李映年,吴宇,等. 135°弯管内硫浆输送的数值模拟[J]. 石油与天然气化工, 2017, 46(1): 22-26.
【打印本页】   【HTML】   【下载PDF全文】   【查看/发表评论】  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被：浏览 2479次   下载 1222次 本文二维码信息
码上扫一扫！
分享到： 微信 更多
字体:加大+|默认|缩小-
135°弯管内硫浆输送的数值模拟
孙芳芳1,2,MuhammadAdnan2,3,张楠2,宋彬4,李映年4,吴宇4,刘蔷4
1.中国矿业大学(北京)资源与安全工程学院 ;2.中国科学院过程工程研究所多相复杂系统国家重点实验室 ;3.中国科学院大学;4. 中国石油西南油气田公司天然气研究院
摘要:
采用欧拉-欧拉法,对硫浆在135°弯管内的流动状态进行数值模拟。通过和Toda实验的90°弯头对比进行模型的验证。验证结果表明,模拟值和实验值吻合良好。对相同操作条件下45°和90°弯头的压降进行了比较分析,分析了硫浆体积分数和硫浆速度对弯头压降的影响。同时,研究了硫浆体积分数和硫浆速度对135°弯管内流动状态的影响。对本研究所针对的管道而言,当硫浆体积分数为0.15时,建议输送速度大于1.2 m/s。 
关键词:  液固两相流  数值模拟  欧拉-欧拉模型  弯头压降  硫浆输送 
DOI：10.3969/j.issn.1007-3426.2017.01.005
分类号:
基金项目:
Numerical simulation of sulfur slurry transportation in a 135° bend pipe
Sun Fangfang1,2, Muhammad Adnan2,3, Zhang Nan2, Song Bin4, Li Yingnian4, Wu Yu4, Liu Qiang4
1. School of Resources and Safety Engineering, China University of Mining & Technology (Beijing), Beijing, China;2. State Key Laboratory of Multiphase Complex Systems, Institute of Process Engineering, Chinese Academy of Sciences, Beijing, China;3. University of Chinese Academy of Sciences, Beijing, China;4. Research Institute of Natural Gas Technology, PetroChina Southwest Oil & Gasfield Company, Chengdu, Sichuan, China
Abstract:
A numerical simulation study for flow behavior of sulfur slurry in 135° bend pipe has been conducted by Eulerian-Eulerian model. Validation of the models could be obtained from the comparison with a 90° elbow of Toda. The predicted results were in good agreement with experimental data. A general comparison of pressure drop in the 45° and 90° elbow were also discussed in present research at the same operating condition as a reference. The effects of the sulfur slurry volume fraction and sulfur slurry velocity on the pressure drop in elbow as well as on the flow characteristics in 135° bend were studied. In present research, when the sulfur slurry volume fraction was 0.15, the minimum transport velocity was proposed to be higher than 1.2 m/s.
Key words:  liquid-solid two-phase flow  numerical simulation  Euler-Euler model  pressure drop in bend  transportation of sulfur slurries